5MHz Variable Pulse Generator Generator operates at 115VAC, measures 10" x 7" x 3", and weighs 2.2 lbs. Comes complete with manual, and 3-year warranty. Product Specifications
| Specifications |
INPUT Trigger/Gate, DC coupled BNC
connector, TTL compatible 10MHz, max
input ±10VP-P.Impedance 400 .Sensitivity Pulses >40ns wide, 2.4VP-P or sine wave >1.7VRMS.OUTPUTS 3 Outputs, DC coupled,
BNC connector.VAR Impedance Constant 50VAR Amplitude 0.5-10V into open circuit. 0.25-5.0V driving 50, variable with Amplitude control, rise/fal times
less than 30ns.TTL Drive Standard TTL levels, buffered to drive up to 40 TTL loads, rise/fal time less than 20nsSYNC +2.4V TTL compatible pulse, buffered to drive minimum 10 TTL loads.>SYNC Timing 20ns pulse width, leads main outputs by >20ns, rise/fall time less
than 20 ns. |
| MODES |
Run 0.5Hz to 5MHz continuous output pulse train; pulse width, spacing independently
variable 100ns to 1s with 10:1 verniers over seven decade ranges, accurate ±5% ,
calibrated at minimum, maximum settings.Trig Positive edge of Trigger input, DC to 10MHz crossing 1V threshold triggers single pulse, width determined by Pulse Width
controls.Gate Output pulse train occurs synchronous with leading edge of Gate input, continues while gate is high, last pulse when gate goes low completes. May also be activated manually with One-Shot momentary push button.One-Shot single pulse, width determined by Pulse Width controls, occours synchronous with manual activation of One-Shot momentary push button.Square Wave In any mode, converts Output to symmetrical square wave with period equal to twice the sum of the Pulse Width and Pulse Spacing control settings.Complement Inverts the Output; Sync out leads failing rather than rising edge. |
|
My Account
About Us
